iPhone 7 preview

plans to release its next-generation iPhone in the fall of 2016, and with a launch date fast approaching, details about the new device have been leaking out at a rapid pace. As with most iPhone launches, we’ve seen a slew of rumors that have given us a solid look at what we can expect to see when Apple unveils its new iPhone in September.

Of course, as with any rumor cycle, we have seen some conflicting information, so there will still be an element of surprise when Apple CEO Tim Cook and other Apple executives debut the 2016 iPhone.

Since the 3GS launched in 2009, Apple has used an alternating “S” naming formula to mark years where the iPhone does not receive a major redesign, saving its numbered upgrades for years where design changes are introduced. Releases have been as follows:

2007 – iPhone
2008 – iPhone 3G
2009 – iPhone 3GS
2010 – iPhone 4 (new design)
2011 – iPhone 4s
2012 – iPhone 5 (new design)
2013 – iPhone 5s
2014 – iPhone 6 and iPhone 6 Plus (new design)
2015 – iPhone 6s and iPhone 6s Plus

The next-generation iPhone is expected to becalled the iPhone 7 and since we are expecting Apple to continue offering two versions of the iPhone — with 5.5 and 4.7-inch displays — we will also see an iPhone 7 Plus. There have been some rumors suggesting Apple could alter its standard numbered naming convention, instead calling at least one model of the 2016 iPhone the “iPhone Pro,” but it is unclear at this point if those rumors are accurate.

Because 2015 marked an “S” iPhone upgrade year that introduced new features such as an improved camera and a better processor, 2016 will bring an even-year upgrade that will include a new iPhone design in addition to new features.

Every rumor we’ve heard about the iPhone 7’s look suggests it will be a modest update that continues to use a design similar to the design of the iPhone 6s. It is said to have the same general shape as the iPhone 6s, but it may have a camera that protrudes less (though rumors currently disagree on this point). Antenna bands across the back of the device have been removed, but are expected to remain at the top, bottom, and sides of the iPhone. The front of the iPhone is also expected to see some changes with a longer earpiece cutout, a relocated ambient light sensor, and a flushpressure-sensitive home button that incorporates haptic feedback.


Mockup of iPhone 7 case showing possible flush rear camera and no antenna bands across rear.

Some rumors suggest Apple is aiming to make the iPhone 7 up to 1mm thinner, perhaps through the removal of the 3.5mm headphone jack and the implementation of a thinner Lightning port, but other rumors suggest the iPhone 7 and 7 Plus will have a body that is the same thickness as the iPhone 6s.

With no headphone jack, wired headphones will connect to the iPhone 7 using its Lightning port and Bluetooth headphones will connect wirelessly. Apple is rumored to be working on Lightning-equipped EarPods to sell alongside the iPhone 7. The removal of the headphone jack may also improve water resistance and it will leave room for a second speaker, but the second speaker may only be cosmetic without actually introducing stereo sound.

Blueprints and an image of a device said to be the iPhone 7 Plus have surfaced depicting a Smart Connector on the back of the shell, suggesting that is another potential feature, but it is not yet clear what it would be used for and other rumors have said it will not be included. If the Smart Connector rumors are accurate, it appears it will be a feature limited to the larger-screened model.

Subscribe to the MacRumors YouTube channel for more videos.

Internal specs for the iPhone 7 aren’t yet known, but we can speculate Apple will continue on its path of introducing more powerful, efficient devices with each design iteration. The iPhone 7 and iPhone 7 Plus are expected to include next-generation A10 processors manufactured by TSMC. Internal storage space is getting a boost, with entry-level devices expected to start at 32GB instead of 16GB.

There are rumored to be some distinguishing features between the iPhone 7 and the larger-screened iPhone 7 Plus. The iPhone 7 may ship with 2GB RAM, while the iPhone 7 Plus could include 3GB RAM, and there is said to be a different camera system in the iPhone 7 Plus thatuses two cameras instead of one with 2-3x optical zoom and improved performance in low-light conditions for brighter, more detailed photos. The iPhone 7 will likely continue to use a standard single-lens camera as multiple sources have said the dual lens camera is exclusive to the 5.5-inch iPhone.

The iPhone 7 and the iPhone 7 Plus may be released to the public on Friday, September 16, according to rumors. Pre-orders for the two devices are reportedly planned for September 9, suggesting a debut on September 6 or September 7.

Part Leaks and Dummies

Images and a video depicting what appears to be a fully functional iPhone 7 running Apple’s prototype SwitchBoard software surfaced in July, giving us our clearest look yet at what we can expect from the upcoming device.


Notable features include relocated antenna bands, a larger protruding rear camera, and no headphone jack. The headphone jack of the device has been replaced with a second set of speaker holes, but rumors have disagreed on whether the iPhone 7 will feature stereo sound or if the holes will be cosmetic.


Rumors suggest the iPhone 7 will have a flush, pressure-sensitive home button, but visually, the device’s home button looks similar to the iPhone 6s home button.

We’ve also previously seen images of the rear casing of the iPhone 7, which look identical to the functional device.

iPhone 7

There have also been several iPhone 7 dummy units floating around, which have likely been designed for case makers based on leaked iPhone 7 specifications. The dummy units also look similar to the leaked images of the working iPhone 7, and in the video below, a dummy unit was compared to the iPhone 6s to give us an idea of the differences we can expect to see between the two phones.

An image depicting what was said to be the front panel of the iPhone 7 also surfaced in July, but the panel in the images directly conflicts with the previous iPhone 7 leaks that we’ve seen. It features a wider, bigger earpiece and relocated sensor positions, which is in line with one previous rumor, but these changes were not visible in either the dummy units or the alleged functional iPhone 7. For that reason, either this panel is fake or the previous iPhone 7 leaks are fake.


Actual photos of the iPhone 7 Plus or an iPhone 7 Plus shell have not yet surfaced, but we have seen several dummy units that are likely representative of the iPhone 6 Plus design.

The first dummy unit image was leaked on a Chinese website in March, followed by anadditional images in July. All of the iPhone 7 Plus dummies feature a design similar in shape to the iPhone 6s Plus, but without rear antenna bands. They also include a protruding, pill-shaped camera enclosure that includes two cameras inside, as is rumored for the larger-screened device, along with a round flash.


Dummy unit images depict a Smart Connector on the back of the iPhone, but rumors disagree on whether this is a feature that will actually be included. It’s been seen in part leaks and in iPhone 7 Plus blueprints, but according to to Japanese site Mac Otakara, Apple has decided not to include a Smart Connector on any iPhone 7 model.


The front display of an alleged iPhone 7 Plus dummy was seen in July with a design that’s nearly identical to the design of the iPhone 6s. Not much can be gleaned from the display image, but it does appear to have a normal home button, potentially ruling out previous rumors of a flush home button if it is representative of the actual design of the iPhone 7 Plus. Also notable in the image is a missing mute switch, an inexplicable change because leaked iPhone 7 parts do depict a mute switch. For that reason, iPhone 7 Plus dummy images may not reflect the actual finished design of the device.


We’ve seen images of the main logic board said to be destined for the iPhone 7, but because it is bare, little can be gleaned about the device from the picture. In the coming weeks, a fully assembled logic board may surface, giving us more information to work with.

The display assembly paired with the front panel of the iPhone 7 was spotted in an image in August, and it appears the display and digitizer flex cables connect to the bottom of the logic board rather than the top, a change from previous iPhone models. The reversed cable orientation corresponds to an image of the iPhone 7 logic board, suggesting this is a legitimate part.


Images depicting what could may be the dual-lens camera component for the iPhone 7 Plus surfaced from multiple sources in the early months of 2016. The part has an “821” number on it, which has been associated with Apple in the past, suggesting it could be a legitimate component and representative of the dual-lens camera that will be used in the 5.5-inch iPhone 7 Plus.


The iPhone 7 is expected to use an A10 chip manufactured by TSMC based on its 16nm FinFET WLP process, which will bring performance improvements to Apple’s new devices. An image of an unfinished A10 chip, manufactured in July, was spotted in mid-August.


Case Leaks, Design Drawings and Renderings

iPhone 7 and iPhone 7 Plus blueprints reportedly sourced directly from Taiwan-based Apple supplier Catcher were leaked in May, confirming the removal of the headphone jack in both models. The two designs in the blueprints also feature protruding cameras, with the iPhone 7 using a larger single camera and the iPhone 7 Plus adopting a dual-lens camera as has been rumored. There is no second speaker depicted replacing the headphone jack, so the blueprints may be incomplete.


iPhone 7 blueprint

The first image (above) depicts the blueprint of the iPhone 7, with no Smart Connector located on the rear of the device. There have been conflicting rumors on whether the iPhone 7 will include a Smart Connector, but the second blueprint (below) depicts the iPhone 7 Plus with a Smart Connector, suggesting the larger-screened iPhone will perhaps include the connector while the smaller iPhone 7 will not.


iPhone 7 Plus blueprint

Both devices continue to feature a design similar to the design of the iPhone 6s and iPhone 6s Plus, which is in line with other rumors. The antenna bands are not pictured in the images, and previous rumors suggest they will be removed from the back of the device while remaining present on the sides of the device.

A third image also allegedly sourced from Apple manufacturer Catcher Technology featuring the iPhone 7 depicts the same design changes.

Screen Shot 2016-03-14 at 08.28.29

The Catcher schematic and blueprint both feature a larger camera hole, with a slightly protruding lens that is less pronounced than the protruding lens in the iPhone 6s. The Catcher images do not appear to depict a device that is significantly thinner, casting doubt on rumors suggesting the iPhone 7 could be up to a millimeter thinner than the iPhone 6s and as thin as the 6.1mm iPod touch.

Japanese magazine MacFan published design drawings of the iPhone 7 Plus, which are also in line with rumors that the iPhone 7 and 7 Plus will feature largely the same design as the iPhone 6s and 6s Plus. The schematics, which depict the 5.5-inch iPhone, say the iPhone 7 Plus will measure in at 158.22mm x 77.94mm x 7.3mm, identical to the dimensions of the iPhone 6s Plus.


iPhone 7 schematics leaked in August suggest that while Apple plans to replace the headphone jack in the device with a second speaker hole, itmay be purely cosmetic to make the bottom symmetrical. According to text in the schematic, the area where the 3.5mm headphone jack was located has been replaced with a microphone and microphone mesh, without a mention of a speaker in that location. The secondary holes will potentially be non-functional, aside from the one furthest to the right, which is a microphone.

set of molds said to be for the iPhone 7 and iPhone 7 Plus include a single-lens camera for the smaller device and a dual-lens camera for the larger device. The iPhone 7 mold appears to depict a larger camera, perhaps to accommodate an improved sensor. Both cameras protrude.


Neither mold depicts a Smart Connector, calling into question rumors that have suggested a Smart Connector will be a feature included on the iPhone 7 Plus.

The first alleged case for the iPhone 7 surfaced in March, with the overall design appearing to be similar to the iPhone 6s. It features the same pill-shaped volume buttons and side-located power buttons, but it has cutouts for two speakers.


The two speaker cutouts replace the cutout for a headphone jack, which is said to be eliminated in the iPhone 7 in favor of an all-in-one Lightning port.

We compared an iPhone 7 case to an iPhone 6s, and while the older device fit into the iPhone 7 case (suggesting the new phone won’t be dramatically thinner), there were some differences. The iPhone 7 case appears to have a larger opening for the camera, which is likely designed to accommodate the rumored larger single-lens camera on the iPhone 7.

Additional cases designed for the iPhone 7 Pluswere spotted in June, suggesting case makers are confused over the features that will be included in the larger-screened device. While a camera cutout for a dual-lens camera appears to be a universally accepted feature, a cutout for a Smart Connector has been seen in one case, but is absent from another.

iphone 7 cases 2

Case manufacturer Sunnyc has created an iPhone 7 case that includes a cutout for a Smart Connector (above), while other cases found on Alibaba do not (below).


Early cases for new devices are often based on schematics obtained from factory workers and other inside sources and can give a solid picture of upcoming iPhone designs, but they are not always accurate.


The iPhone 7 may be somewhat thinner than the iPhone 6s, but exactly how thin remains in question. Apple may use the elimination of the headphone jack, advances in chip packing technology, and a slimmer Lightning port to cut down on the thickness of the device.

One rumor has suggested the iPhone 7 will be between 6.0mm and 6.5mm, but leaked renderings and cases do not appear to depict a device that thin, and design drawings fromJapanese magazine MacFan feature no reduction in thickness at all.

Information obtained by MacRumors and confirmed by additional reports indicates the iPhone 7’s body will be similar to the iPhone 6s, adopting the same general design language.

Apple is planning to change the design of the antenna bands on the device, doing away with the thick white antenna bands that are located across the back of the Phone 6s rear shell. The bands located at the top, bottom, and sides of the device are rumored to remain on the iPhone 7, but the rear bands are eliminated for a cleaner look.


A mockup of what the iPhone 7 may look like. It is said to have a design similar to the iPhone 6s, with a slightly thinner body and no antenna bands across the middle of device’s rear shell.

Both the iPhone 7 and the iPhone 7 Plus will continue to feature protruding cameras. The iPhone 7 Plus is expected to adopt a dual-camera setup, resulting in a wider protrusion. The camera in the iPhone 7 may also be larger to accommodate sensor improvements.

Some unconfirmed rumors about the iPhone 7’s design suggest it could have a strengthened, water resistant frame that ditches Apple’s traditional aluminum casing for “new compound materials. More reliable rumors point towards a pressure sensitive home button and improved water resistance is expected.

One rumor from the Asian supply chain said Apple will introduce a new deep blue coloroption, which will replace the traditional Space Gray shade that Apple has used for several years.

iPhone 7 deep blue concept

Rendering of a deep blue iPhone 7

Japanese site Mac Otakara, the source of the rumor, later said that a mistake was made and the alleged deep blue shade is actually a new shade of Space Gray. The new Space Gray color is said to be “close to black, but not quite black,” and “much darker” than the Space Gray used for the iPhone 6s. A rendering of a dark Space Gray iPhone shows what a deeper color might look like.


It is not clear if the rumors of a new shade of Space Gray are accurate as an alleged iPhone 7 rear shell leak includes a casing that shares the same light gray colorway of the Space Gray iPhone 6s. Based on this leak, it appears the iPhone 7 will be offered in similar shades of Space Gray, Silver, Rose Gold, and Gold that the iPhone 6s was available in.

iPhone 7 colorways

In the video below, featuring a set of dummy models that replicate the design of the iPhone 7, there’s a clear look at the Rose Gold, Gold, and Space Gray shades. It appears the Space Gray color could be slightly darker than the Space Gray of the iPhone 6s, but it does not look like a true Space Black as has been rumored.

The front panel of the iPhone 7 may also seesome design changes with a slightly longer earpiece and relocated ambient light sensors, but this hasn’t been spotted in most part leaks. Potential front panel changes and tweaks to the rear camera will render iPhone 6s cases and screen protectors unusable with the iPhone 7, despite the design similarities.

handful of rumors have suggested Apple will do away with a physical home button in the iPhone 7, instead adopting a pressure sensitive home button that sits flush with the phone.

Apple’s Force Touch technology will reportedly be built into the home button to provide haptic feedback when pressed, much like the Force Touch trackpad on Apple’s most recent MacBooks. With haptic feedback, iPhone users would still feel the sensation of pressing on the home button even without a button to actually depress.

Multiple reports from KGI Securities analyst Ming-Chi Kuo point towards a modest updatefor the iPhone 7 without “many attractive selling points,” and a report from The Wall Street Journal says only “subtle changes” will be introduced.

No Headphone Jack


Apple may be able to decrease the thickness of the iPhone 7 or make room for additional parts such as a larger battery by eliminating the headphone jack and instead adopting an all-in-one Lightning port that will support bothcharging and music playback with Lightning-equipped headphones.

Rumors about the removal of the headphone jack have come from several distinct sources, but there is still some doubt because an image said to depict the Lightning cable assembly of the iPhone 7 features a headphone jack. It is not known if the image is a legitimate part, but if it is, it a headphone jack could be present in both the iPhone 7 and 7 Plus or just the iPhone 7.

If the headphone jack is removed in the iPhone 7, headphones will need a Lightning connector or a 3.5mm jack-to-Lightning adapter to connect to the Lightning port on the bottom of the phone. The device will also support wireless Bluetooth headphones.

In addition to allowing Apple to perhaps shave some thickness off of the iPhone 7 and save valuable internal space, requiring headphones to connect through the Lightning port will boost overall audio quality. Apple is rumored to be considering some new noise-canceling technology to remove background noise during music playback and phone calls, but rumors have disagreed on whether this will be introduced in the iPhone 7 or the next-generation iPhone.

In the video below, we took a look at several sets of Lightning-equipped headphones to explore the benefits and downsides of the removal of the headphone jack.

Apple is said to be working on Lightning-equipped EarPods that will ship alongside the iPhone 7. They will be similar to the existing EarPods that are included in the iPhone box, but with a Lightning connector instead of a headphone jack. An video depicting the alleged Apple-branded Lightning-based EarPods surfaced in August. The EarPods look almost identical to existing EarPods, but with a Lightning connector instead of a 3.5mm jack.

A different rumor suggests Apple will ship the iPhone 7 with standard 3.5mm EarPods and a 3.5mm jack to Lightning adapter to allow them to connect to the new devices, but this seems like an unusual choice compared to the introduction of new Lightning-equipped EarPods. We have, however, heard this rumorfrom two separate sources, so it’s possible there is some truth to it.

As for the empty space left by the headphone jack, Apple is said to be planning to replace it with a second speakerstereo sound.


Along with Lightning-equipped EarPods that will perhaps ship alongside the iPhone 7, Apple isrumored to be working on a new set of wireless Bluetooth earphones that would be sold alongside the iPhone 7 as a premium accessory and an alternative to the EarPods.

While traditional Bluetooth headphones have a wire that connects the left and right ear pieces to each other, Apple is said to be designing earphones that do not include a connective cord between the ear pieces. These earphones would be similar in design to the Bragi Dash, an upcoming set of earphones that features individual ear pieces for each ear.


Apple is rumored to be working on wireless earphones that could look similar to the Bragi Dash

The wireless earphones, which have a battery life of approximately four hours due to the separate chips and batteries in each one, will reportedly charge through an included carrying case that also serves as a rechargeable battery to extend battery life as much as possible.Apple is also said to be designing a custom Bluetooth chip that will further extend battery life. Apple has reportedly been working on such a chip for several years.

Trademark filings from a company linked to Apple suggest Apple could be planning to nameits wireless headphones “AirPods.”

Smart Connector?

An image of a device said to be the iPhone 7 Plus has surfaced, depicting a Smart Connector on the back of the device. The Smart Connector is a feature introduced in the iPad Pro, used to connect to accessories like the Smart Keyboard.

A Smart Connector has also been pictured indesign drawings from Mac Fan and in January design blueprints sourced from Apple supplier Catcher, both of which depict it as a feature limited to the iPhone 7 Plus.

A rumor from Japanese site Mac Otakara, however, suggests Apple has decided toeliminate the Smart Connector from its iPhone plans, and molds said to be for the iPhone 7 and iPhone 7 Plus do not picture Smart Connectors. Based on rumors, if a Smart Connector is indeed an iPhone 7 feature, it appears it may be available only in the larger 5.5-inch model.

It is not known how Apple would utilize a Smart Connector in an iPhone, but it could perhaps be used for wireless charging or battery cases.

iPhone 7 vs. iPhone 7 Plus vs. “iPhone Pro”

With the release of the larger-screened iPhone 6 and 6 Plus, Apple differentiated between the two devices by including Optical Image Stabilization in the iPhone 6 Plus for improved photo and video capturing abilities. The iPhone 6s Plus continued to offer Optical Image Stabilization while the iPhone 6s did not, and it appears the iPhone 7 and the iPhone 7 Plus could also see different features, mainly when it comes to the camera — the 4.7-inch iPhone 7 is said to have a regular single-lens camera while the 5.5-inch iPhone 7 Plus is said to incorporate a dual-lens camera.

Early iPhone 7 Plus rumors suggested Apple was working on two iPhone 7 Plus models, one with a single camera and one with a dual-lens camera, but KGI Securities Ming-Chi Kuo, the source of those rumors, later reversed his prediction. Apple is expected to introduce a single 5.5-inch iPhone 7 Plus model with a dual-lens camera.

There’s also a questionable rumor sourced from Chinese site MyDrivers suggesting the dual-lens iPhone 7 Plus with Smart Connector could actually be dubbed the “iPhone Pro” instead of the “iPhone 7 Plus,” but this naming theory was tied to the rumors indicating Apple would release two iPhone models and may now be inaccurate.


The cameras in the dual-lens iPhone 7 Plus may take advantage of technology Apple acquired through the purchase of Israeli camera company LinX Imaging last year. Image quality in the iPhone 7 Plus could be greatly improvedwith the introduction of a dual-lens system, narrowing the gap between photos taken with the iPhone and those taken with a more robust DSLR cameras.


iPhone 7 mockup with dual-lens camera system (Image:Computer Bild)

LinX dual-lens technology offers several potential benefits for the iPhone 7 Plus, with rumors specifically pointing towards 2-3x optical zoom capabilities, perhaps implemented through the use of two lenses with different focal lengths. With a dual-lens camera system, images captured are clearer and brighter with less noise and truer color, allowing for pictures that include more detail, especially in low light conditions.

The dual cameras in the iPhone 7 Plus will reportedly use two sensors to capture two photos with different color patterns, merging them together for one final photograph. Capturing two images at once and merging them is expected to result in brighter, more detailed photos and better zoom functionality.


An example of LinX’s noise reduction technology. Far more detail is preserved in the LinX image on the right compared to the iPhone 5 image on the left.

There’s a possibility that a dual-lens system like the one LinX created could be used for depth mapping, allowing users to do things like take 3D scans of real world items or use depth information to refocus an image. For additional information on what LinX technology could mean for the iPhone 7, make sure to check out our in-depth LinX post.

An example of how a dual-lens camera could potentially improve photos taken with the iPhone 7 Plus can be seen in the below video demonstration of similar technology from Corephotonics. Corephotonics’ dual-lens system uses a wide-angle lens and a lens capable of 5X optical zoom and aggregates data from both to get a better picture.

We at MacRumors have created a video mockup that outlines what a dual-camera interface could look like in the Camera app on the iPhone, based on a recent Apple patent. In the patent, Apple outlines a split-screen interface with one side displaying the standard view from a wide-angle camera and another side displaying a zoomed-in view from an additional lens with a longer focal length. Pictures and video could be captured with both views simultaneously.

As for the camera in the iPhone 7, there’s no word on what improvements may be introduced. If the iPhone 7 Plus is set to see major gains in image quality, it stands to reason the iPhone 7 will also see significant improvement, even if it is implemented outside of a dual-lens system. Renderings and drawings the iPhone 7 depict a larger camera cutout, perhaps to accommodate an improved sensor, and Optical Image Stabilization, previously limited to larger-screened devices, is a possibility.


According to another prediction from KGI Securities analyst Ming-Chi Kuo, the iPhone 7 and the iPhone 7 Plus may have differing amounts of RAM. The smaller 4.7-inch iPhone 7 may ship with 2GB of RAM, while the larger 5.5-inch iPhone 7 Plus may ship with 3GB RAM. 3GB of RAM in the iPhone 7 Plus will reportedly be used to compensate for the increased image processing demands of the dual-lens camera.

DigiTimes has also reported that at least one iPhone 7 or iPhone 7 Plus model will start at 3GB RAM.


In the iPhone 7, Apple is rumored to be dropping the entry-level 16GB storage tier in favor of a starting storage tier of 32GB. With this change, the entry-level models of the iPhone 7 and iPhone 7 Plus are expected to start at 32GB.

Research firm TrendForce believes Apple willintroduce an iPhone 7 Plus in 32, 128, and 256GB capacities, which is in line with rumors that have been heard about the device. There’s no word on what specific storage capacities could be included in the smaller iPhone 7, but storage space may be a differentiating factor between the iPhone 7 and the iPhone 7 Plus.

An unconfirmed rumor suggests the larger iPhone 7 Plus will include a high-end 256GB storage option that will not be available with the iPhone 7. 256GB is a capacity that is not offered in any of Apple’s current iOS devices, but a256GB SanDisk flash storage chip possibly appropriate for use in an iPhone has been spotted.

Wireless Charging

With the Lightning port being used for music playback, there will be no way to charge the iPhone 7 while headphones are plugged in, which has sparked some speculation about wireless charging. According to one rumor, Apple is exploring wireless charging technologythat could potentially be included in the iPhone 7.

While Apple is said to be looking into wireless charging for the iPhone 7, there is no guarantee the feature will make it into the finished product, and wireless charging may be a feature pushed back to the 2017 iPhone. Aside from one early rumor, there have been no additional hints wireless charging is coming in the iPhone 7, suggesting it may indeed have been pushed back.

Other Features


Apple is said to be sourcing some LTE modemsfor the iPhone 7 from Intel, perhaps adopting the Intel 7360 LTE modem and introducing faster LTE speeds on the device. The chip features faster theoretical downlink speeds of up to 450 MB/s, uplink speeds of up to 100 MB/s, and support for LTE category 10 and 29 bands. Intel will supply at least 50 percent of the LTE chips for the iPhone 7.

Longtime Apple modem supplier Qualcomm is also expected to provide some of the LTE modems for the iPhone 7, and the X12 modemis the most likely candidate for inclusion in the device. Qualcomm’s X12 chipsets feature theoretical download speeds up to 600Mb/s and upload speeds up to 150Mb/s, with support for 4×4 MIMO, LTE Advanced carrier aggregation, LTE-U small cells, and automatic LTE and Wi-Fi switching.

Apple will use Intel modems for the AT&T iPhone 7 and some versions of the iPhone sold in other countries, while Qualcomm will supply modems for use in Verizon iPhone models and all Chinese models.


Battery life in the iPhone 7 could be similar to or slightly better than battery life in the iPhone 6s. An image of the battery said to be for the iPhone 7 lists a capacity of 7.04 watt-hours, almost identical to the iPhone 6 which had a 7.01 watt-hour battery that was a bit larger than the 6.61 watt-hour battery in the iPhone 6s.


The 4.07 watt-hour capacity may translate to 1,960 mAh, according to information shared by OnLeaks. At 1,960 mAh, the iPhone 7 battery would be approximately 14 percent larger than the battery in the iPhone 6s (1,715 mAh) and combined with software improvements and a more efficient A10 processor, the new iPhone could potentially feature a longer battery life than the iPhone 6s. Of course, with rumors suggesting major camera improvements, the two devices may require larger batteries to drive bigger camera sensors or for other new features.


Apple is rumored to be working on AMOLED displays for future iPhones, but the technology will not be ready for the iPhone 7. The iPhone 7 will continue to use the same TFT-LCD display technology used in the iPhone 6s.

Based on display improvements introduced in the 9.7-inch iPad Pro, DisplayMate’s Ray Soneira speculates the iPhone 7 display could include similar features, as Apple often expands display advancements across its entire product lineup.

He believes improvements could potentially include the DCI-P3 Wide Color gamut, introducing more vivid, true-to-life colors, and an improved anti-reflection coating to lower screen reflectance for better performance in high ambient light. True Tone, the 9.7-inch iPad Pro feature that adjusts the color temperature of the display to match ambient lighting, could also potentially be included if Apple “upgrades the ambient light sensors so they measure color in addition to brightness.” A rumor from Mac Otakara suggests the iPhone 7 will include two new sensors on the front of the device, which could potentially be related to True Tone display capabilities.


Apple is planning to implement improved electromagnetic interference (EMI) shielding techniques in the iPhone 7, with the goal of individually shielding most of the major chips in the device. EMI shields are used in iPhones and all other electronic devices to prevent wireless interference between different products.

Improved EMI shielding will perhaps allow Apple to place the various chips in the iPhone 7 closer together, allowing it to shrink down the device or leave room for new components or a larger battery.

Apple is said to be planning to use a new fan-out packaging technology for the antenna switching module and radio frequency chip in the iPhone 7, which is a feature that allows the iPhone to switch between LTE and other antennas like GSM and CDMA. Fan-out packaging technology allows for a greater number of I/O terminals while cutting down on chip size.

Using this packaging method, along with single-chip EMI shields, Apple will be able to fit more components into a single package while minimizing signal loss and also cutting down on the potential for interference in wireless communication.


A part leak suggests the iPhone 7 could include dual SIM trays to allow the device to send and receive calls and messages from multiple phone numbers. Dual SIM trays would also allow the iPhone 7 to work with multiple carriers at the same time, ideal for traveling.

Release Date

Apple typically introduces its new flagship iPhones in the fall during the month of September, and it’s likely the company will continue to use the same release pattern for the iPhone 7. We expect to see the iPhone 7 and iPhone 7 Plus debut in the fall of 2016.

According to Evleaks, a source who often shares accurate information on pre-release iOS devices, the 2016 iPhone will be released during the week of September 12, specifically on Friday, September 16. This date would be in line with past iPhone release dates. Pre-orders are rumored to be starting on September 9, suggesting an iPhone event could take place on September 6 or September 7.

Apple plans to rely on multiple manufacturing partners to assemble the iPhone 7 and 7 Plus, including Foxconn, Pegatron, and Wistron, so it’s able to meet demand for the device. Foxconn and Pegatron will assemble the 4.7-inch model, while Foxconn and Wistron will assemble the 5.5-inch model.

Foxconn and Pegatron have already begun hiring new employees to prepare for the launch of the iPhone 7. Hiring is said to have started early because of a “more complex” build, possibly due to the dual cameras rumored for the larger-screened device.

Beyond the iPhone 7

The iPhone 7 hasn’t launched yet, but we’re already hearing rumors about the iPhone that will be released in 2017 to mark the 10th anniversary of the launch of the first iPhone. That device is said to feature some radical design changes, perhaps adopting a glass-backed body and an edge-to-edge OLED display with integrated Touch ID and no home button.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s